What is plasma gel bio-filler, and is it a dermal filler?

Plasma gel bio-filler: a small vial of amber gel on a round steel warming plate with a wisp of steam

Written by Oscar Tellez, founder of Regen Med Academy. Oscar is not a clinician. This post is education for licensed providers and is not medical advice. Last updated November 13, 2026.

Plasma gel bio-filler is a gel made from the patient’s own plasma, which is heated and then cooled until it thickens. It is not a dermal filler in FDA’s sense of the word. Plasma gel is not an FDA-approved dermal filler, and its use is off-label. This post explains what it is, how it differs from PRP and from an approved filler, and what you can say about it to a patient.

What are biofillers?

Biofiller, or bio-filler, is a trade word that clinics and courses use for a gel that is prepared from a patient’s own blood and then injected. The version this post covers is plasma gel.

The word is not an FDA term. FDA has a device category for dermal fillers, and none of the FDA sources linked in this post uses the word bio-filler. So the name tells you where the material comes from, but it tells you nothing about its status.

Where does the name come from? The bio half points to the source, which is the patient’s own blood, and the filler half borrows a word that patients already know from approved products. That second half is where the trouble starts, and it is the reason this post has the title it has.

We use the name too. Our course is called Bio-Fillers with Plasma Gel, and the course page says it in plain words: plasma gel is not an FDA-approved dermal filler, and its use is off-label. If you want the wider picture first, read our post on what regenerative aesthetics means.

How is plasma gel made?

In outline, it takes three steps. Blood is drawn from the patient, and then it is spun so the plasma separates from the red cells. After that, plasma is heated and cooled until it thickens into a gel.

That is all the detail this post will give, and that is on purpose. We do not publish temperatures, times or volumes, because a blog post is not a protocol and a number copied from a web page is not training.

There is a plain reason to be careful here. Heating is the step that turns a liquid into a gel. It has to be taught, watched and checked in person, which is why preparing the gel is part of the hands-on session in our course.

What should you ask about any protocol before you use it? Ask where its settings came from, what device does the heating, and what that device’s labeling says it is for. Then ask which part of the plasma is heated, and whether anything is mixed back in afterward.

Free mini course

The FDA rules behind this field, in a short, self-paced course. It costs nothing.

Get the free FDA course

Is plasma gel a dermal filler?

No. Plasma gel is made from the patient’s own plasma. It is not an FDA-approved dermal filler, and its use is off-label.

Here is what FDA means by the term. Its page on the subject says, “Dermal fillers, also known as injectable implants, soft tissue fillers, lip and facial fillers, or wrinkle fillers are medical device implants approved by the FDA.” The sentence goes on to name where they are used, which is the face and the back of the hands. In plain words, a dermal filler in FDA’s sense is a manufactured implant that FDA has approved.

Plasma gel does not match that description, because it is not manufactured and shipped with a label. It is prepared in your office, from one patient’s blood, for that same patient.

We also looked at FDA’s page of approved dermal fillers, and it does not describe any filler made from a patient’s own blood or plasma. FDA marks that page as current as of November 9, 2020, so check FDA’s device databases for anything newer.

So the two things share a word and a syringe, and on the regulatory side they share very little. If a patient asks whether plasma gel is a filler, the true answer starts with no.

What does FDA say approved dermal fillers are for?

FDA is specific. It says it has approved dermal fillers “for use in adults 22 years of age or older (over the age of 21),” and then it lists the uses. Here are the first two on the list, in FDA’s words.

  • “Absorbable (temporary) fillers are approved for moderate to severe facial wrinkles and skin folds, such as nasolabial folds (lines extending from the sides of the nose to the edges of the mouth) and perioral lines (small wrinkles in the skin around the mouth and lips).”
  • “Augmentation (increased volume) of lips, cheeks, chin, and back of the hand.”

The list names a few more uses. FDA’s list of approved uses covers the face and the back of the hand. Each filler has its own approved use, so the labeling for one product does not speak for another.

How does a filler get on that list? FDA’s record for a dermal implant for aesthetic use shows a Class 3 device, and the submission type is PMA. PMA stands for premarket approval. FDA says, “PMA is the most stringent type of device marketing application required by FDA.”

FDA also says what stands behind an approval. On its list of approved fillers, it says approval “is based on the review of data collected from controlled clinical studies that evaluated the safe and effective use of the wrinkle fillers when injected into specified areas of facial tissue and the hands.”

Why go through all of this in a post about plasma gel? We do it because it shows what the word approved carries with it. An approved filler is a named product with data that FDA reviewed, a label and a list of uses, and plasma gel has none of those four.

How is plasma gel different from PRP?

Both start with the same blood draw, so the two get mixed up. PRP is short for platelet-rich plasma, which is plasma with the platelets concentrated in it, and it is injected as a liquid. Plasma gel has been through one more step, the heating and cooling, and it is injected as a gel.

So what is a PRP bio-filler? It is another name for the same idea, which is a gel made from the plasma in a patient’s own blood. The name tells you less than you might think, so ask what is in the syringe.

Here is a question I get about PRP, and how I answer it: “Doctors ask me all the time, is it leukocyte-rich or leukocyte-poor PRP? Well, first of all, which leukocytes are you talking about?” Ask the same kind of question about a gel. Which part of the plasma was heated, and was anything added to it?

There is a regulatory difference too. FDA’s July 2020 guidance on its tissue rules describes PRP as “blood taken from an individual and given back to the same individual as platelet rich plasma.” It says PRP “is not an HCT/P under 21 CFR Part 1271 because it is a blood product.” HCT/P is FDA’s short name for human cell and tissue products.

In plain words, FDA does not run PRP through its tissue rules, and that does not put PRP outside FDA’s rules. The same guidance does not mention plasma gel, and it says nothing about heating plasma, so do not borrow FDA’s sentence about PRP and hang it on a gel. Heating is an added step, and an added step raises its own question for your attorney.

What is the FDA status of the devices used to make it?

The devices that prepare PRP are FDA cleared for use with bone graft material. FDA’s product code for PRP systems is ORG, and its name for the device is “platelet and plasma separator for bone graft handling.”

What does the record say the device is for? It says, “Preparation of autologous platelet rich plasma from a small sample of peripheral blood for mixing with bone graft to improve handling characteristics.” Autologous simply means the material comes from the patient’s own body. Nothing in that sentence mentions a gel, a heating step or the face.

Notice the word cleared. A PRP system reaches the market through a filing called a 510(k), and FDA says its order “‘clears’ the device for commercial distribution.” Cleared is not the same as approved, and neither word applies to the gel itself.

So where does that leave a provider? Federal device law has a line on off-label use, in section 396 of Title 21. It says nothing in the device law shall be read “to limit or interfere with the authority of a health care practitioner to prescribe or administer any legally marketed device to a patient for any condition or disease within a legitimate health care practitioner-patient relationship.” The same section keeps the limits on promoting unapproved uses, so what you do in the room and what you say in an ad are separate questions.

Then there is the heating step, and the device that does it has a status of its own. Ask the vendor whether it is a medical device, whether it has a 510(k), and what its labeling says it is for, and get each answer in writing.

We are not tied to any vendor. Bring the system you already own. We work with several suppliers, and we take no commission.

What do we not know about plasma gel?

There is a fair amount we do not know, and you should say so to patients.

Plasma gel has no FDA-approved label. A label is where the answers that FDA has reviewed are written down: what a product is for, who it is for, and what its risks are. Without a label, there is no FDA-reviewed answer to the questions patients ask most.

Patients will ask what to expect, and for how long. We will not answer either question, because there is no FDA-reviewed answer to give. How does it compare with an approved filler? We will not answer that either, for the same reason, and we say nothing in this post about what a patient will see.

What about risk? FDA’s page says, “The most concerning risk associated with the use of dermal fillers is unintentional injection into a blood vessel.” FDA wrote that sentence about dermal fillers, and we did not find one from FDA about plasma gel. But the blood vessels of the face are in the same place, whatever is in the syringe.

What we do know is the status, and you can say the status with confidence. Plasma gel is the patient’s own plasma, it is not an FDA-approved dermal filler, and its use is off-label.

What does a practice need before it offers plasma gel?

Let’s say you already offer PRP for the skin, which is an off-label use, and a patient asks whether you do bio-filler. What has to be in place before you say yes? Here is the order we would walk through.

  1. Scope. Ask your board who in your practice may draw blood, prepare the gel and inject it into the face. What you may perform is set by your own state license and board. A Certificate of Completion does not extend it.
  2. Training. Each person who will inject needs hands-on training with a consenting patient, under supervision. Facial anatomy comes before technique.
  3. Devices. Pull the 510(k) clearance for your PRP system, and read what it says the device is for. Then get the vendor’s written answers about the device that heats the plasma.
  4. Consent. The form should say that plasma gel is not an FDA-approved dermal filler and that its use is off-label. Our sample consent forms are teaching templates, and your own attorney must review them before you use them.
  5. Coverage. Providers ask us what insurance they need, and whether they are covered while working on a patient. You are responsible for your own coverage. Talk to us and we will help you work out what to ask your carrier.
  6. Wording. Have your attorney read the service page before it goes live.

The scope call, the clearance and the consent form are the slow parts, and they come before the first patient. Ask your carrier about plasma gel by name, and get the answer in writing.

What can I tell a patient about plasma gel?

You can tell a patient everything that is true, and the true list is short.

  • It is made from your own plasma.
  • The plasma is heated and then cooled until it becomes a gel.
  • It is not an FDA-approved dermal filler.
  • This use is off-label, and the system we use to prepare your blood is FDA cleared for use with bone graft material.
  • It has no FDA-approved label, so I cannot give you an FDA-reviewed answer on what to expect, or for how long.

Check the fourth line against the clearance for your own system before you say it. The clearance for the system you own is the only one that counts for you.

What should you leave out? Leave out any line about what the patient will see or for how long, and leave out any line that ranks it against an approved filler. Be careful with the word natural, too. The material does come from the patient, but used as a selling word, natural promises more than those facts support.

The FTC’s guidance for health products explains why. It says marketers need “adequate substantiation for all objective product claims” before an ad runs. It also says they are responsible for claims that are “suggested or reasonably implied.” One word on a menu can imply a lot.

FDA has a line for providers who inject approved fillers, and it is a good model for any injection consult. It reads, “Before injection, thoroughly inform the patient of all risks of the procedure and the specific product you intend to use.” For plasma gel, the specific product is the patient’s own plasma, and its status is part of what you tell them.

What does bio-filler training cover?

Any bio-filler training should cover four things: how the gel is prepared, the anatomy of the face, who is and is not a candidate, and injection technique. It should also say off-label out loud, in the first few minutes.

Here is what our Bio-Fillers with Plasma Gel course covers. You learn how plasma is prepared and processed into plasma gel through heating and cooling, and you review facial anatomy, patient selection and contraindications. The course also covers injection technique for regions of the face, taught under supervision.

How is it taught? Private training is the only format we offer, and one instructor runs the whole session. The theory is online and arrives before you travel, so the day is not a lecture. In the room, the work is hands-on with a consenting patient, under supervision, and every licensed person in the room performs, within their own scope.

You can come to an instructor’s location, which starts at $5,000. Or the instructor can come to your practice, which starts at $10,000 with travel and lodging inside the quote. Every engagement is quoted, so the figure depends on what you need.

You should also hear the limit, which is that a day or a weekend does not make a specialist. What a course gives you is enough supervised contact to begin, and people to call afterward.

Frequently asked questions

Is plasma gel FDA approved?

No. Plasma gel is not an FDA-approved dermal filler, and its use is off-label. The devices that prepare PRP are FDA cleared for use with bone graft material, and cleared is not the same as approved. Neither word applies to the gel itself, so say that plainly in the consult, in the consent form and on your website.

What do I say when a patient asks about duration?

Say that you have no FDA-reviewed answer to give. Plasma gel has no FDA-approved label, so there is no FDA-reviewed figure to quote, and we will not borrow one from a brochure. If a vendor or a course gives you a number, ask where it came from and ask to read the source yourself.

Can I call plasma gel a filler on my website?

That is a question for your own attorney, because it is about what your words imply. A patient who reads the word filler may think of an FDA-approved product. If the word is on your page, put the plain sentence next to it: plasma gel is not an FDA-approved dermal filler, and its use is off-label.

Can a nurse or a nurse practitioner inject plasma gel?

That depends on your state and your board, and we cannot answer it for you. What you may perform is set by your own state license and board. Our rules by state page gives our reading of each state, with its sources and the date we checked. It is a starting point, not legal advice.

Can I make plasma gel with the PRP system I already own?

You can bring the system you already own to training. Before that, read its 510(k) clearance and see what it says the device is for. The heating step uses its own device, so ask that vendor about its status in writing, and keep in mind that we do not sell either one.

Does Regen Med Academy sell plasma gel kits or devices?

No. We are an education company, and we sell education and nothing else, which means we do not sell a device or a biologic. We are not tied to any vendor, and we take no commission. If a course is also selling you the kit, weigh what it tells you about the kit with that in mind.

Key takeaways

  • Plasma gel is a gel made from the patient’s own plasma, which is heated and then cooled.
  • Plasma gel is not an FDA-approved dermal filler, and its use is off-label.
  • FDA says dermal fillers are medical device implants it has approved, for listed uses on the face and the back of the hand.
  • PRP is injected as a liquid. Plasma gel has been through an added heating step, and FDA’s guidance on PRP does not mention it.
  • The devices that prepare PRP are FDA cleared for use with bone graft material. Ask about the heating device separately.
  • Plasma gel has no FDA-approved label, so we say nothing about what a patient will see or for how long, and we do not rank it against approved fillers.
  • Scope comes first. Your state license and board decide who may prepare and inject it.

RMA disclosure

Regenerative Medicine Academy (RMA) is an education company. We train licensed providers in some of the techniques this post covers. This post is education only. It is not medical, legal, business, tax or financial advice.

It is your responsibility to confirm the modality is legal in your state for your license. Do that before you book.

Your next step

Pull the 510(k) clearance for your PRP system and write the status sentence for plasma gel into your consent form draft. Then ask your board who in your practice may inject it. When you are ready, see our other aesthetics courses, get the free FDA course, or request a date now.

The course that goes with this post

Bio-Fillers with Plasma Gel

Plasma gel preparation and placement, taught as the off-label use it is, hands on with a supervised consenting patient.

Starting at $5,000 at an instructor’s clinic, or $10,000 inside your practice.

Or see all courses

Regen Med Academy is an education company. Everything on this site is education for licensed providers, not medical or legal advice, not a treatment recommendation, and not an offer to treat. Before you offer a procedure in your state, talk to your own legal counsel and your licensing board.

Table of Contents

Prefer our take? Star us in Google.

More from the blog